Mounting The Chassis On The Workbench - Ruijie RG-S6510-4C Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
(4) Screw in the screws to install mounting brackets on the rack.
Caution

Install the L-bracket by driving screws into the four among six screw holes on each side.

Distinguish left and right rack-mount guide rails according to the notations.

The rack-mount guide rails delivered with the chassis are applicable to a cabinet with a depth ranging
from 800 mm (31.50 in.) to 1,200 mm (47.24 in.).
3.3.4

Mounting the Chassis on the Workbench

If a standard 19-inch EIA rack is not available, mount the switch on a clean workbench.
Lay the chassis flat on the workbench and ensure adequate airflow around the chassis.
40
Installing the Switch