Ruijie RG-S6510-4C Hardware Installation And Reference Manual page 25

Hardware Installation and Reference Guide
2. LED
Table 1-17 LED
Silkscreen
Label
N/A
3. Technical Specifications
Table 1-18 Technical Specifications
Item
Dimensions (W x D x H)
Weight
Power connector
Rated input voltage range
Max. input voltage range
Max. input current range
Rated output current
Rated output voltage
Rated output power consumption
Hot swapping
Cooling
LED Description
Solid green: The power module is outputting power normally.
Blinking green at 1 Hz:
○
○
Solid red:
Power status
○
LED
○
Blinking red at 1 Hz: The power module is operating but with alarms,
such as high power, high current, high temperature, and low fan
rotation speed.
Off: The power module is not receiving power or not operating even
after receiving power.
Specification
C14 connector for connection with AC/HVDC power cord
65 A
12 V DC
800 W
Supported
Front-to-rear airflow (air exhaust on power module panel)
The power module is in PS OFF state with only 12 V standby output.
The power module is in the cold standby status and not outputting
power.
The power module is not functioning properly (overcurrent,
overvoltage, or fan failure).
The power module in redundancy mode is removed.
Without packing materials: 73.5 mm x 185 mm x 40 mm (2.89 in. x
7.28 in. x 1.57 in.)
With packing materials: 462 mm x 195 mm x 232 mm (18.19 in. x
7.68 in. x 9.13 in.)
Without packing materials: 0.9 kg (1.98 lbs.)
With packing materials: 1.5 kg (3.31 lbs.)
AC: 100 V AC to 240 V AC, 50 Hz to 60 Hz
HVDC: 240 V DC
90 V AC to 264 V AC, 47 Hz to 63 Hz
180 V DC to 310 V DC
AC: 10 A to 5 A (100 V AC to 240 V AC)
HVDC: 5 A (180 V DC to 310 V DC)
16
Overview