EPSON AcuLaser C9200N
5.2.2 MP Tray Mechanical Adjustment
PURPOSE
Adjust the mounting location of the MP tray to operate the MP tray properly.
PROCEDURE
1.
Install the gear so that the protrusion of the gear [1] and the mark [3] on the rack
gear [2] are aligned in a straight line.
Place the MP tray to match the ▼ on the surface of the MP tray Unit with the
2.
center of the scale.
3.
After installing the base plate, check whether Paper Guide operates smoothly.
ADJUSTMENT
Downloaded from
www.Manualslib.com
manuals search engine
[2]
Figure 5-3. MP Tray Mechanical Adjustment
Adjustment
[3]
[1]
[2]
[3]
Revision D
316
Confidential