Using Command History; Saving Your Configuration - ZyXEL Communications ZyXEL Dimension ES-4124 User Manual

Enter
<command> ?
parameters.
sysname> ping ?
<ip|host-name>
help
sysname>

45.10 Using Command History

The Switch keeps a list of recently used commands available to you for reuse. You can use any
commands in the history again by pressing the up ( ) or down ( ) arrow key to scroll through
the previously used commands and press
of commands.
sysname> history
enable
exit
show ip
history
sysname>

45.11 Saving Your Configuration

After you set the Switch settings with the configuration commands, use the
command to save the changes permanently.
The
write memory
You must save your changes after each CLI session. All unsaved
configuration changes are lost once you restart the Switch.
sysname# write memory
ES-4124 User's Guide
to display detailed help information about the sub commands and
destination ip address
Description of ping help
[ENTER]
command is not available in User mode.
Chapter 45 Introducing Commands
. Use the history command to display the list
write memory
337