Maintenance, 10H; Diesel Engine Check Oil Level - Fayat Group Dynapac CC800 Instruction Manual

Table of Contents

Advertisement

1
2
Fig. Engine
1. Dipstick
2. Filler cap
2020-10-27

Maintenance, 10h

Every 10 hours of operation (Daily)
Park the roller on a level surface.
Park the roller on a level surface.
The engine must be switched off and the
The engine must be switched off and the
parking brake activated when checking or
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
adjusting the roller, unless otherwise specified.
Ensure that there is good ventilation (air
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
carbon monoxide poisoning.
Ensure that the engine cover is fully open when
Ensure that the engine cover is fully open when
work is carried out under the cover.
work is carried out under the cover.

Diesel engine Check oil level

Open the engine cover lock and lower the engine
cover forwards.
Check the oil level using the dipstick (1). The level
should be between the marks. If the level is near the
lower mark, top off with fresh engine oil via the filler
cap (2). See under the heading lubricants for the
correct oil grade.
Never overfill with oil, as this can damage the
Never overfill with oil, as this can damage the
engine.
engine.
4812160801_G.pdf
Maintenance, 10h
75

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac cc900Dynapac cc1000Dynapac cc900g

Table of Contents