Emergency Braking; Switching Off - Fayat Group Dynapac CC800 Instruction Manual

Table of Contents

Advertisement

Fig. Control panel
3. Emergency stop
31
Figure. Instrument panel
1. Starter switch
2. Engine speed control
9. Instrument cover
22. Panel for warning lamps
31. Parking brake
48

Emergency braking

There is a brake in each drum motor that acts as an
emergency brake during operation.
3
After braking, return the forward/reverse lever to the
neutral position and pull out the emergency stop.
Restart the engine.

Switching off

22
Turn the engine speed control (2) back to idling. Allow
the engine to idle for a few minutes to cool.
9
Activate the parking brake (31).
1
Check instruments and warning lamps to see if any
2
faults are indicated. Switch off all lights and other
electrical functions.
Turn the starter switch (1) to the left to the switched off
position. At the end of the shift, fold over the
instrument cover (9) and lock.
4812160801_G.pdf
To brake in an emergency situation, push in the
To brake in an emergency situation, push in the
emergency stop (3), hold the steering wheel firmly
emergency stop (3), hold the steering wheel firmly
and be prepared for a sudden stop. The diesel
and be prepared for a sudden stop. The diesel
engine stops.
engine stops.
Operation
2020-10-27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac cc900Dynapac cc1000Dynapac cc900g

Table of Contents