Maintenance Work - Fayat Group BOMAG BC 463 RB-3 Service Manual

1.2.9.3 Towing the machine
1.2.10

Maintenance work

1.2.10.1 Preliminary remarks
1.2.10.2 Work on hydraulic lines
Tow the machine only in case of emergency or to avoid an acci-
dent.
Before releasing the parking brake apply suitable measures to
secure the machine against unintended rolling.
Use a tractor vehicle with sufficient traction and braking power for
the unbraked towed load.
You should generally use a tow bar.
Before starting towing operations make sure that the fastening
means are able to withstand the load and are fastened at the
points provided for this purpose.
Before removing the towing facility apply appropriate measures to
secure the machine against unintended rolling.
Adhere to the specified operating, maintenance and repair meas-
ures.
The machine must only be serviced by qualified personnel author-
ised by the operating company.
Keep unauthorised persons away from the machine.
When performing maintenance work on machines used in contami-
nated environments, all applicable national or local safety regula-
tions must be applied.
Perform maintenance work only with the engine shut down.
Make sure that the engine cannot be accidentally started during
maintenance work.
Always lower the dozer blade / bucket to the ground and shut down
the engine before relieving the hydraulic system.
Always lower the dozer blade / tilt blade to the ground and shut
down the engine before relieving the hydraulic system.
Relieve hydraulic pressures before working on hydraulic lines.
Hydraulic oil escaping under pressure can penetrate the skin and
cause severe injury. Immediately call for medical advice when
injured by hydraulic oil.
Do not step in front of or behind the wheels when performing
adjustment work in the hydraulic system.
Do not change the setting of pressure relief valves.
Drain the hydraulic oil at operating temperature – danger of
scalding!
BC 463 RB-3 / BC 473 RB/RS/EB-3
General – Concerning your safety
29