Table of Contents
Advertisement
Figure. Instrument panel
1. Starter switch
2. Engine speed control
3. Emergency stop
6. Forward/reverse lever
31
Figure. Instrument panel
12. Switch for sprinkler
25. Parking brake lamp
31. Parking brake
2020-10-27
Driving
Operating the roller
3
1
6
2
Release the parking brake (31) and check that the
parking brake lamp (25) goes off.
Turn the engine speed control upwards (2) and lock it
in the working position.
Check that the steering is working correctly by turning
the steering wheel once to the right and once to the
left while the roller is stationary.
When compacting asphalt, remember to turn on the
sprinkler system (12).
25
Carefully move the forward/reverse lever (6) forwards
or backwards, depending on which direction of travel
is required.
Speed increases as the lever is moved away from the
neutral position.
12
Check when operating that the warning lamps do not
come on.
4812160801_G.pdf
Under no circumstances is the machine to be
Under no circumstances is the machine to be
operated from the ground. The operator must be
operated from the ground. The operator must be
seated inside the machine during all operation.
seated inside the machine during all operation.
Make sure that the area in front of and behind the
Make sure that the area in front of and behind the
roller is clear.
roller is clear.
The speed should always be controlled using the
The speed should always be controlled using the
forward/reverse lever and never by changing the
forward/reverse lever and never by changing the
engine speed.
engine speed.
Operation
45
Advertisement
Table of Contents
