Air Circulation - Check; Scrapers - Check, Adjustment - Fayat Group Dynapac CC800 Instruction Manual

Fig. Bay under the floor
1. Water filter
1
Fig. Engine cover
1. Cooling air grille/engine
2
3
Fig. Front scrapers in transport
position
2. Locking nut
3. Mounting plate
2020-10-27
Sprinkler system - Check, cleaning
Check that the water filter (1) is not blocked. Clean
where necessary. Clean the water filter by unscrewing
the filter's lower section, and clean the strainer and
1
filter housing. Reassemble in the reverse order.

Air circulation - Check

Check that the circulation of air to the engine through
the grille in the engine cover is unobstructed.

Scrapers - Check, adjustment

Make sure that the scrapers are undamaged. Adjust
the scrapers if necessary in the following way:
For firmer application of the scraper, undo the locking
nut (2) and adjust it until the desired application is
achieved.
Lock the setting by tightening the lock nut against the
mounting bracket (3).
Adjust the pressure on both scraper brackets.
To set a lower scraper pressure, adjust in the reverse
order to the above.
4812160801_G.pdf
Maintenance, 10h
79