Fig. Towing the roller
58
Restored brake
Restored brake
Undo the two screws (192) alternately, and then insert
Undo the two screws (192) alternately, and then insert
the plugs (191).
the plugs (191).
Tightening torque
Tightening torque
Screws (192)
Screws (192)
Plugs (191)
Plugs (191)
Towing the roller
A towing bar must be used when towing, as the
A towing bar must be used when towing, as the
roller has no brakes and can only be slowed and
roller has no brakes and can only be slowed and
stopped by the vehicle towing the roller.
stopped by the vehicle towing the roller.
The roller must be towed slowly, max. 3 km/h (2
The roller must be towed slowly, max. 3 km/h (2
mph) and for short distances only, max. 300 m
mph) and for short distances only, max. 300 m
(1000 ft).
(1000 ft).
When towing/recovering a machine, the towing device
must be connected to both lifting holes. Pulling forces
shall act longitudinally on the machine as illustrated.
Max total towing force 50.8 kN (11,430 lbf), 25.4 kN
(5,715 lbf) per fork.
Reset the steps taken for towing as described in
Reset the steps taken for towing as described in
the towing instructions on the previous page.
the towing instructions on the previous page.
4812160801_G.pdf
Miscellaneous
2020-10-27