Parking; Chocking The Drums; Master Switch - Optional; Plus Version - Fayat Group Dynapac CC800 Instruction Manual

Table of Contents

Advertisement

Fig. Set-up
1. Chocks
3
2
Fig. Battery compartment
1. Battery disconnector
(only PLUS version)
2. Power socket, 12V
3. Cable lug
2020-10-27

Parking

Chocking the drums

1

Master switch - Optional

The power to the roller should be disconnected at the
end of the working shift.

PLUS version

Put the battery disconnector (1) in the Off position and
remove the key.

CC version

Remove the red cable lug (3) from the plus terminal on
the battery.
1
This will prevent battery discharging and will also
make it difficult for unauthorized persons to start and
operate the machine. Lock also the engine cover.
4812160801_G.pdf
Never leave the operator platform without
Never leave the operator platform without
activating the parking brake (31).
activating the parking brake (31).
Make sure that the roller is parked in a safe place
Make sure that the roller is parked in a safe place
with respect to other road users. Chock the drums
with respect to other road users. Chock the drums
if the roller is parked on sloping ground.
if the roller is parked on sloping ground.
Keep in mind that there is a risk of freezing during
Keep in mind that there is a risk of freezing during
the winter. Drain the water tanks and water lines.
the winter. Drain the water tanks and water lines.
Operation
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac cc900Dynapac cc1000Dynapac cc900g

Table of Contents