Driving Near Edges - Fayat Group Dynapac CC800 Instruction Manual

8
Avoid operating close to edges and ditches and the
like as well as on poor ground conditions that
jeopardizes the bearing strength and capacity to
support the roller. Pay attention to potential obstacles
above the machine, such as overhead cables and the
branches of trees etc.
Pay particular attention to the stability of the substrate
when compacting close to edges and holes. Do not
compact with a large overlap from the previous track in
order to maintain roller stability. Consider other
compaction methods such as remote-control or a
walk-behind roller close to steep slopes or where the
bearing strength of the substrate is unknown.

Driving near edges

Never operate with the drum outside the edge, the Never operate with the drum outside the edge, the
substrate might not have full bearing strength or substrate might not have full bearing strength or
the edge is close to a slope. the edge is close to a slope.
Keep in mind that the machine's center of gravity Keep in mind that the machine's center of gravity
moves outwards when steering. For example, the moves outwards when steering. For example, the
center of gravity moves to the right when you steer center of gravity moves to the right when you steer
to the left. to the left.
4812160801_G.pdf
Safety - when operating
2020-10-27