After The First 50 Hours Of Operation; Every 50 Hours Of Operation (Weekly); Every 250 / 750 / 1250 / 1750 Hours Of Operation - Fayat Group Dynapac CC800 Instruction Manual

Action Action
6 6 Change the engine oil and oil filter Change the engine oil and oil filter
12 12 Change the hydraulic fluid filter Change the hydraulic fluid filter
Check the belt tension on the hydraulic vibration and Check the belt tension on the hydraulic vibration and
steering pump drive belt steering pump drive belt
Pos. Pos. Action Action
in fig in fig
7 7 Empty the air cleaner dust trap Empty the air cleaner dust trap
11 11 Check rubber elements and bolted joints Check rubber elements and bolted joints
Pos. Pos. Action Action
in fig in fig
7 7 Clean the air cleaner filter element, check that hoses Clean the air cleaner filter element, check that hoses
and connectors are tight and connectors are tight
4 4 Clean the outside of the radiator core. Clean the outside of the radiator core.
2 2 Check lubrication of controls and pivots Check lubrication of controls and pivots
5 5 Check fan belt tension and condition Check fan belt tension and condition
6 6 Change the engine oil and oil filter Change the engine oil and oil filter
2020-10-27
Maintenance - Maintenance schedule

After the FIRST 50 hours of operation

Refer to the contents to find the page number of the
sections referred to !

Every 50 hours of operation (Weekly)

Refer to the contents to find the page number of the
sections referred to !

Every 250 / 750 / 1250 / 1750 hours of operation

Refer to the contents to find the page number of the
sections referred to !
4812160801_G.pdf
Comment Comment
Refer to the engine manual Refer to the engine manual
Comment Comment
Comment Comment
In dusty environments, as In dusty environments, as
necessary. necessary.
Lubricate as necessary Lubricate as necessary
Replace where necessary Replace where necessary
Refer to the engine manual Refer to the engine manual
69