Unlocking The Articulation; Transport - Fayat Group Dynapac CC800 Instruction Manual

Fig. Articulation
1. Locking pin
2. Locking arm
3. Locking bolt
54

Unlocking the articulation

3
2
Pull out the locking pin (1), turn the locking arm (2) for
the rear frame, secure the locking arm by inserting the
locking bolt (3) through the mounting in the rear frame
and locking arm. Insert the locking pin.
1

Transport

Tie-down and secure the machine according to the
Cargo Securing Certificate for the specific machine if
this is avaliable and applicable.
If not, tie down and secure the machine according to
the cargo securing rules that are valid for the country
where the transport takes place.
Before securing the machine ensure that :
• the parking brake is applied and in good working condition
• the articulated joint is in closed position
• the machine is centered laterally on the platform
• the lashings are in good condition and fulfills the
corresponding rules for transport securing.
4812160801_G.pdf
Remember to unlock the articulation before Remember to unlock the articulation before
operating. operating.
Never lash over the machine's articulated joint, nor Never lash over the machine's articulated joint, nor
over the machine's operator platform. over the machine's operator platform.
Miscellaneous
2020-10-27