Table of Contents
Advertisement
Fig. Steering joint
Fig. Engine compartment
1. Screw
2. Screw
2020-10-27
Steering joint - Check
Inspect the steering joint to detect any damage or
cracks.
Check and tighten any loose bolts.
Check also for any stiffness and play in the steering
joint. Rectify if necessary.
Belt tension on the hydraulic vibration and
steering pump drive belt - Check
If the hydraulic pump drive belt can be pressed in 5-6
mm between the pulleys with a force of 50 Nm, then
the belt is correctly tensioned.
Do as follows to tension the belt:
- Undo the screws (1) and (2).
- Press over the hydraulic pump so that the belt
tensions to the specified extent.
1
- Tighten screw (1) and then screw (2).
2
- Check that the belt still has the correct tension after
tightening.
Replace the belt when necessary, or after 2000 h.
4812160801_G.pdf
Maintenance - 2000h
111
Advertisement
Table of Contents
