Table of Contents
Advertisement
1
2
Fig. Seat position
1. ROPS
2. Seat belt
2020-10-27
Safety - when operating
Prevent persons from entering or remaining in
Prevent persons from entering or remaining in
the risk zone, i.e. a distance of at least 7 m (23
the risk zone, i.e. a distance of at least 7 m (23
ft) in all directions from operating machines.
ft) in all directions from operating machines.
The operator may allow a person to remain in
The operator may allow a person to remain in
the risk zone, however he/she must be attentive
the risk zone, however he/she must be attentive
and operate the machine only when the person
and operate the machine only when the person
is fully visible or has given a clear indication of
is fully visible or has given a clear indication of
where he or she is.
where he or she is.
Avoid driving across a slope. Drive straight up
Avoid driving across a slope. Drive straight up
and down sloping ground.
and down sloping ground.
Sitting position
Remain seated at all times when operating the roller. If
the operator stands up during operation, a buzzer
sounds. After 4 seconds the brakes are activated and
the engine stops. Brace yourself for a sudden stop.
Always use the seat belt where fitted. Where the
Always use the seat belt where fitted. Where the
seat belt is not used, there is a great risk that the
seat belt is not used, there is a great risk that the
operator will be thrown off and land under the
operator will be thrown off and land under the
machine if the machine topples over.
machine if the machine topples over.
The seat belt is standard equipment on rollers fitted
with Roll Over Protective Structure (ROPS) (1).
ROPS should always be in the raised position
ROPS should always be in the raised position
when machines with foldable ROPS are operated
when machines with foldable ROPS are operated
Work driving
Dynapac always recommends mounted ROPS
Dynapac always recommends mounted ROPS
(Roll Over Protective Structure) and seat belt
(Roll Over Protective Structure) and seat belt
usage.
usage.
On machines with foldable ROPS, make sure that
On machines with foldable ROPS, make sure that
the ROPS is correctly mounted in the upright
the ROPS is correctly mounted in the upright
position during all operation.
position during all operation.
4812160801_G.pdf
Safety - when operating
7
Advertisement
Table of Contents
