1
4
3
3
2
5
Fig. Scraper
1. Scraper blade
2. Screw
3. Washer
4. Nut
5. Scraper bracket
2023-05-26
Maintenance, 10h
Every 10 hours of operation (Daily)
Scrapers - Check, adjustment
It is important to consider movement of the drum
It is important to consider movement of the drum
when the machine turns, i.e., the scrapers can be
when the machine turns, i.e., the scrapers can be
damaged or wear of the drum may increase if
damaged or wear of the drum may increase if
adjustment is made closer than the values stated.
adjustment is made closer than the values stated.
If necessary, adjust distance to the drum as follows:
Undo the screws (2), washers (3) and nuts (4)
on the scraper bracket.
Adjust the scraper blade (1).
Tighten the screws (2), washers (3) and nuts (4)
on the scraper bracket.
4812165001.pdf
Maintenance, 10h
101