Hydraulic Reservoir, Level Check - Filling; Check - Coolant System - Fayat Group Dynapac CC800 Instruction Manual

2
1
Fig. Hydraulic reservoir
1. Sight glass
2. Filler hose
1
Figure. Cooling water container
1. Filler cap
2. Level marking
76

Hydraulic reservoir, Level check - Filling

Wipe the sight glass (1) clean. Check that the fluid
level is between the min. and max. markings. Where
required, top off with fresh hydraulic fluid through the
filler hose (2).
See under the heading 'Lubricants' for the correct fluid
grade.

Check - Coolant system

Check that all hoses/hose connectors are intact and
tight. Fill with coolant as specified in the lubricants
specification.
Take great care when opening the radiator cap Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and while the engine is hot. Wear protective gloves and
goggles. goggles.
2
Also check the freezing point. Change the coolant Also check the freezing point. Change the coolant
every other year. every other year.
4812160801_G.pdf
Maintenance, 10h
2020-10-27