Maintenance, 10H; Check - Coolant System - Fayat Group DYNAPAC CC1300C Instruction Manual

Table of Contents

Advertisement

Figure. Cooling water container
1. Filler cap
2. Level marking
2021-12-14

Maintenance, 10h

Every 10 hours of operation (Daily)
Park the roller on a level surface.
Park the roller on a level surface.
The engine must be switched off and the
The engine must be switched off and the
parking brake activated when checking or
parking brake activated when checking or
adjusting the roller, unless otherwise specified.
adjusting the roller, unless otherwise specified.
Ensure that there is good ventilation (air
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
carbon monoxide poisoning.

Check - Coolant system

Check that all hoses/hose connectors are intact and
tight. Fill with coolant as specified in the lubricants
1
specification.
Take great care when opening the radiator cap
Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
while the engine is hot. Wear protective gloves and
goggles.
goggles.
2
Also check the freezing point. Change the coolant
Also check the freezing point. Change the coolant
every other year.
every other year.
4812162101_D.pdf
Maintenance, 10h
75

Advertisement

Table of Contents
loading

Table of Contents