Function Description - Fayat Group Dynapac CC800 Instruction Manual

Table of Contents

Advertisement

No
No
Designation
Designation
1.
1.
Starter switch
Starter switch
2.
2.
Engine speed
Engine speed
control
control
3.
3.
Emergency stop
Emergency stop
4.
4.
Vibration On/Off.
Vibration On/Off.
Switch
Switch
5.
5.
Handbook
Handbook
compartment
compartment
6.
6.
Forward/Reverse
Forward/Reverse
lever
lever
7.
7.
Seat switch
Seat switch
8.
8.
Fuse box (on
Fuse box (on
control column)
control column)
9.
9.
Instrument cover
Instrument cover
12.
12.
Sprinkler, switch
Sprinkler, switch
34

Function description

Symbol
Symbol
AUTO
AUTO
4812160801_G.pdf
Machine description
Function
Function
Positions 1-2: Shut off position, key can be removed.
Positions 1-2: Shut off position, key can be removed.
Position 3a: All instruments and electric controls are
Position 3a: All instruments and electric controls are
supplied with power.
supplied with power.
Position 3b: Glowing. Hold the starter switch in this
Position 3b: Glowing. Hold the starter switch in this
position until the lamp goes out. The starter motor is
position until the lamp goes out. The starter motor is
activated in the next position.
activated in the next position.
Position 3c: Starter motor activation.
Position 3c: Starter motor activation.
Raise the lever and release it into the groove to the
Raise the lever and release it into the groove to the
left to set engine speed to operating speed. To
left to set engine speed to operating speed. To
select idling speed, move the lever to the right and
select idling speed, move the lever to the right and
downwards.
downwards.
When pressed, the emergency stop is activated. The
When pressed, the emergency stop is activated. The
engine switches off and the brakes are activated.
engine switches off and the brakes are activated.
Brace yourself for a sudden stop.
Brace yourself for a sudden stop.
Press once and release to switch vibration on. Press
Press once and release to switch vibration on. Press
again to switch the vibration off.
again to switch the vibration off.
Pull up and open the top of the compartment for
Pull up and open the top of the compartment for
access to handbooks.
access to handbooks.
The engine can only be started when the lever is in
The engine can only be started when the lever is in
neutral. The engine will not start if the
neutral. The engine will not start if the
forward/reverse lever is not in the neutral position.
forward/reverse lever is not in the neutral position.
Direction of travel and speed of the roller is regulated
Direction of travel and speed of the roller is regulated
with the forward/reverse lever. Move the lever
with the forward/reverse lever. Move the lever
forward to drive the roller forwards, etc.
forward to drive the roller forwards, etc.
The speed of the roller is proportional to the distance
The speed of the roller is proportional to the distance
of the lever from the neutral position. The further the
of the lever from the neutral position. The further the
lever is from the neutral position, the higher the
lever is from the neutral position, the higher the
speed.
speed.
Remain seated at all times when operating the roller.
Remain seated at all times when operating the roller.
If the operator stands up during operation, a buzzer
If the operator stands up during operation, a buzzer
sounds. After 4 seconds the brakes are activated
sounds. After 4 seconds the brakes are activated
and the engine stops.
and the engine stops.
Contains fuses for the electrical system. See under
Contains fuses for the electrical system. See under
the heading 'Electrical system' for a description of
the heading 'Electrical system' for a description of
fuse functions.
fuse functions.
Lowered over the instrument plate to protect the
Lowered over the instrument plate to protect the
instruments from the weather and sabotage. Lockable
instruments from the weather and sabotage. Lockable
Upper position = switching on of flow of water to
Upper position = switching on of flow of water to
drum.
drum.
Intermediate position = Sprinkling switched off
Intermediate position = Sprinkling switched off
Lower position = switching on of water to drum via
Lower position = switching on of water to drum via
forward/reverse lever.
forward/reverse lever.
The flow of water can be controlled by means of the
The flow of water can be controlled by means of the
sprinkler timer (13).
sprinkler timer (13).
Watering off
Watering off
Water supply to drum via forward/reverse lever in
Water supply to drum via forward/reverse lever in
AUTO mode. The flow of water can be controlled by
AUTO mode. The flow of water can be controlled by
means of the sprinkler timer (13).
means of the sprinkler timer (13).
2020-10-27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac cc900Dynapac cc1000Dynapac cc900g

Table of Contents