Command/Response.table.for.sis.commands - Extron electronics FOX 4G Matrix 3200 User Manual

Command/response table for SIS commands
Command
Create ties
N • Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%.
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 001*001).
• The ! tie command, & tie command, and % tie command can be used interchangeably.
• The ! tie all command, & tie all command, and % tie all command can be used interchangeably.
X@ X#
Tie input to output
Example:
X@ X#
to output
Tie input
Example (see note, above):
X@ X#
to output
Tie input
Example (see note, above):
Quick multiple tie
Example:
Tie input to all outputs
Example:
Tie input to all outputs
Example (see note, above):
Tie input to all outputs
Example (see note, above):
Read ties
N The ! read tie command, & read tie command, and the % read tie command can be used interchangeably.
Read RGB output tie
Read RGB output tie
Read video output tie
Channel mute commands
Channel mute
Channel unmute
Read channel mute status
Global channel mute
Global channel unmute
X@
N = Input number
X#
= Output number
X$
= Mute
ASCII command Response
(host to switcher) (switcher to host)
X@ X#
* ! Out
1*3!
Out03
X@ X#
* & Out
10*4&
Out04
X@ X#
* % Out
7*5%
Out05
E X@ X# X@ X# }
+Q * !... * ! Qik
E }
+Q3*4!3*5%3*6!4*7! Qik
X@
*! In
5*!
In05
X@
*& In
8*&
In08
X@
*% In
10*%
In10
X# X@]
!
X# X@]
&
X# X@]
%
X#
*1B Vmt
X#
*0B Vmt
X# X$]
B
1*B
Vmt1
0*B
Vmt0
00 – 32 (72) (00 = untied)
01 – 32 (72)
0 = off (unmuted)
1 = on (muted)
FOX 4G Matrix Switchers • Programmer's Guide
Additional
description
X# X@ ]
• In • All Tie input
]
Tie input 1 to output 3.
• In01 • All
X# X@ ]
• In • RGB
]
Tie input 10 to output 4.
• In10 • RGB
X# X@ ]
• In • Vid
]
Tie input 7 to output 5.
• In07 • Vid
]
]
Tie input 3 to output 4,
output 5, and output 6 and
tie input 4 to output 7.
X@ ]
• All
]
Tie input 5 to all outputs.
• All
X@ ]
RGB
•
]
Tie input 8 to all outputs.
• RGB
X@ ]
• Vid
]
Tie input 10 to all outputs.
• Vid
Input
Input
Input
X# ]
*1 Mute output
(no signal is output, but the
light output remains active).
X# ]
*0 Unmute output
(signal is output).
1 = mute on, 0 = mute off.
]
Mute all output channels.
]
Unmute all output channels.
X@ X#
to output .
X@ X#
is tied to output .
X@ X#
is tied to output .
X@ X#
is tied to output .
X#
X#
4-9