Dranetz DBPGFLEX3KPKG User Manual page 212

Parameter Settings in Each Monitoring Mode, continued
The following table lists the default settings for the threshold parameters in each
Setup
parameters
monitoring mode.
(continued)
Parameters
When Volts
go out,
record:
When Amps
go out,
record:
Volts
Amps
Power
Demand
Energy
Harmonics
Flicker (Pst)
Flicker (Plt)
Characterizer
Mode
*Numbers are in percent of nominal unless otherwise specified.
B-10
Standard Current
Power Inrush Recorder
Quality
Waveform Capture Trigger Response
All Active Off All Active
Channels
Channels
Fault Fault
Amps Amps
Channels Channels
Channels
Journal Intervals
10 minutes Off
10 minutes Off
10 minutes Off
15 minutes Off
10 minutes Off
10 minutes Off
10 minutes Off
2 hours Off
IEEE 1159 None
Fault Long-term
Timed
Recording
Off
Volt
Fault Off
Amps
Off 10 minutes
Off 10 minutes
Off 10 minutes
Off 15 minutes
Off 10 minutes
Off 10 minutes
Off 10 minutes
Off 2 hours
None IEEE 1159
Continuous EN50160
Data
Logging
Off All Active
Channels
Off Fault
Amps
Channels
1 second 10 minutes
1 second 10 minutes
1 second 10 minutes
Off 15 minutes
Off 10 minutes
Off 10 minutes
Off 10 minutes
Off 2 hours
None IEC
61000-4-30