Dranetz DBPGFLEX3KPKG User Manual page 168

Compliance History, continued
Evaluation Period: Displays the date and time of the beginning of the evaluation period.
Compliance
History table
Each evaluation period is independent of each other. The default length of evaluation
(continued)
period is a 7-day week period by which the unit calculates information in strict
compliance with the EN50160 standard.
Compliance: Displays a PASS (green) or FAIL (red) mark if evaluation is done for a
complete 7-day week period. Compliance displays an Undetermined (black) mark for
incomplete periods. A PASS or FAIL compliance status is hyperlinked to the
Compliance Statistical Bar Chart that shows the seven parameters required for
determining compliance. See Compliance Statistical Bar Chart on page 8-8.
RMS Event Count: Details of rms variation event count are shown in the EN50160
DISDIP table on page 8-13.
Transient Event Count: The complete table for Transient Overvoltages appears in the
EN50160 DISDIP table on page 8-14.
8-12