Adjusting The Operating Language; Reading Measured Values; Measured Variables" Submenu - Endress+Hauser Proline Cubemass C 100 Operating Instructions Manual

Operation
72
Navigation
"Operation" menu → Locking status
Function scope of "Locking status" parameter
Options Description
Hardware locked The write protection switch (DIP switch) for hardware locking is activated on the
I/O electronic module. This prevents write access to the parameters .
Temporarily locked Write access to the parameters is temporarily locked on account of internal
processes running in the device (e.g. data upload/download, reset etc.). Once the
internal processing has been completed, the parameters can be changed once
again.
11.3

Adjusting the operating language

Detailed information:
• To configure the operating language →  54
• For information on the operating languages supported by the measuring device
→  118
11.4

Reading measured values

With the Measured values submenu, it is possible to read all the measured values.
Navigation
"Diagnostics" menu → Measured values
‣
Measured values
‣
Process variables
‣
Totalizer
11.4.1

"Measured variables" submenu

The Process variables submenu contains all the parameters needed to display the current
measured values for each process variable.
Navigation
"Diagnostics" menu → Measured values → Measured variables
‣
Measured variables
Mass flow
Volume flow
Corrected volume flow
Density
Proline Cubemass C 100 Ethernet/IP
→  72
→  74
→  73
→  73
→  73
→  73
Endress+Hauser