Adapting The Measuring Device To The Process; Conditions; Performing A Totalizer Reset - Endress+Hauser Proline Cubemass C 100 Operating Instructions Manual

Proline Cubemass C 100 Ethernet/IP
Parameter
Totalizer value 1 to n
Totalizer overflow 1 to n
* Visibility depends on order options or device settings
Endress+Hauser
Parameter overview with brief description
Prerequisite
One of the following options is selected
in the Assign process variable
parameter (→  67) of the Totalizer
1 to n submenu:
• Volume flow
• Mass flow
• Corrected volume flow
*
• Target mass flow
*
• Carrier mass flow
One of the following options is selected
in the Assign process variable
parameter (→  67) of the Totalizer
1 to n submenu:
• Volume flow
• Mass flow
• Corrected volume flow
*
• Target mass flow
*
• Carrier mass flow
11.5

Adapting the measuring device to the process

conditions

The following are available for this purpose:
• Basic settings using theSetup menu (→  54)
• Advanced settings using theAdvanced setup submenu (→  64)
11.6

Performing a totalizer reset

Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n
Preset value 1 to n
Reset all totalizers
Description
Displays the current totalizer counter
value.
Displays the current totalizer overflow.
Operation
User interface
Signed floating-point
number
Integer with sign
→  76
→  76
→  76
75