12.11.2 Filtering The Event Logbook; 12.11.3 Overview Of Information Events - Endress+Hauser Proline Cubemass C 100 Operating Instructions Manual

Proline Cubemass C 100 Ethernet/IP
Endress+Hauser

12.11.2 Filtering the event logbook

Using the Filter options parameter, you can define which category of event messages is
displayed in the Events list submenu.
Navigation path
"Diagnostics" menu → Event logbook → Filter options
Filter categories
• All
• Failure (F)
• Function check (C)
• Out of specification (S)
• Maintenance required (M)
• Information (I)

12.11.3 Overview of information events

Unlike a diagnostic event, an information event is displayed in the event logbook only and
not in the diagnostic list.
Info number
I1000 --------(Device ok)
I1089 Power on
I1090 Configuration reset
I1091 Configuration changed
I1110 Write protection switch changed
I1111 Density adjust failure
I1137 Electronic changed
I1151 History reset
I1155 Reset electronic temperature
I1157 Memory error event list
I1185 Display backup done
I1186 Restore via display done
I1187 Settings downloaded with display
I1188 Display data cleared
I1189 Backup compared
I1209 Density adjustment ok
I1221 Zero point adjust failure
I1222 Zero point adjustment ok
I1256 Display: access status changed
I1264 Safety sequence aborted
I1335 Firmware changed
I1361 Wrong web server login
I1397 Fieldbus: access status changed
I1398 CDI: access status changed
I1444 Device verification passed
I1445 Device verification failed
I1446 Device verification active
I1447 Record application reference data
Diagnostics and troubleshooting
Info name
91