Endress+Hauser Proline Cubemass C 100 Operating Instructions Manual page 60

Commissioning
Parameter
MAC address
Default network settings
DHCP client
IP address
60
Navigation
"Setup" menu → Communication
‣
Communication
MAC address
Default network settings
DHCP client
IP address
Subnet mask
Default gateway
Parameter overview with brief description
Description
Displays the MAC address of the measuring
device.

MAC = Media Access Control
Select whether to restore network settings.
Select to activate/deactivate DHCP client
functionality.
Result
If the DHCP client functionality of the Web
server is activated, the IP address, Subnet
mask and Default gateway are set
automatically.

• Identification is via the MAC
address of the measuring device.
• The IP address in the IP address
parameter is ignored as long as the
DHCP client parameter is active.
This is also the case, in particular, if
the DHCP server cannot be reached.
The IP address in the parameter of
the same name is only used if the
DHCP client parameter is inactive.
IP address of the Web server integrated in
the measuring device.
If the DHCP client is switched off and write
access is enabled, the IP address can also be
entered.
Proline Cubemass C 100 Ethernet/IP
User interface / Selection /
User entry
Unique 12-digit character
string comprising letters and
numbers, e.g.:
00:07:05:10:01:5F
• Off
• On
• Off
• On
4 octet: 0 to 255 (in the
particular octet)
→  60
→  60
→  60
→  60
→  61
→  61
Factory setting
Each measuring device is given
an individual address.
Off
Off
192.168.1.212
Endress+Hauser