Quantities
Reactive energy
(Eq
, Eq
, Eq
1
2
kvarh
Apparent energy
(Es)
kVAh
Internal clock: ± 20 ppm
6.2.4 Current Sensors
6.2.4.1 Precautions For Use
NOTE: Refer to the safety data sheet provided or the downloadable
user manual.
Current clamps and flexible current sensors are used to measure the current
flowing in a cable without opening the circuit.
They also isolate the user from dangerous voltages present in the circuit.
The choice of the current sensor to use depends on the current to be measured
and the diameter of the cables. When installing current sensors, point the arrow
on the sensor towards the load.
When a current sensor is not connected, the device displays
Power & Energy Logger Model PEL 52 - User Manual
Measurement range
Sin φ = [0.8 inductive; 0.6 capacitive]
V = [100 V; 600 V]
I = [5 % I
)
T
Sin φ = [0.8 inductive; 0.6 capacitive]
V = [100 V; 600 V]
I = [10 % I
V = [100 V; 600 V]
I = [5 % I
; 10 % I
]
nom
nom
; 120 % I
]
nom
nom
; 120 % I
]
nom
nom
Table 4
Intrinsic uncertainty
± 2.5 % R
± 1.5 % R
± 0.5 % R
.
49