2.4 INSTRUMENT REAR PANEL
2 magnets
2.5 SD CARD SLOT
■
Before opening the SD card slot, disconnect the device, and turn it off.
To unlock the protective cover, turn the screw a quarter turn.
■
Open the protective cover to access the SD card.
■
To remove the SD card, press it in until you hear a click, and then release.
■
To insert the SD card, hold the PEL device with front panel facing up. With the
■
contacts on the SD card facing up and forward, gently push card straight into
the card slot until you hear a click.
Screw
Power & Energy Logger Model PEL 52 - User Manual
Protective Cover
Figure 5
SD Card Slot
Figure 6
4 non-slip pads
15