Characteristics - AEMC PEL 52 User Manual

6.2.4.2 Characteristics

The measurement ranges are those of the current sensors. Sometimes they may
differ from the ranges measurable by the PEL.
a) MiniFlex MA193
®
Nominal range
Measurement range
Maximum clamping diameter
Influence of the conductor's
position in the sensor
Influence of an adjacent conductor
carrying an AC current
Safety
b) MiniFlex MA194
®
Nominal range
Measurement range
Maximum clamping diameter
Influence of the conductor's
position in the sensor
Influence of an adjacent
conductor carrying an AC current
Safety
NOTE: Currents < 0.4 A for the 300 A range and < 2 A for the 3000 A
range are set to zero.
50
MiniFlex MA193
®
0.4 A to 360 Aac for the 300 A range
2 A to 3600 Aac for the 3000 A range
Length = 10 in (250 mm); Ø = 2.75 in (70 mm)
Length = 14 in (350 mm); Ø = 3.9 in 100 (mm)
> 40 dB typical at 50/60 Hz for a conductor in
contact with the sensor and > 33 dB near the
IEC/EN 61010-2-032 or BS EN 61010-2-032,
pollution degree 2, 600 V CAT IV or 1000 V CAT III
Table 5
MiniFlex MA194
®
0.4 A to 360 Aac for the 300 A range
2 A to 3600 Aac for the 3000 A range
Length = 24 in (609 mm); Ø = 7.4 in (190 mm)
> 40 dB typical at 50/60 Hz for a conductor in contact with
the sensor and > 33 dB near the latching mechanism
IEC/EN 61010-2-032 or BS EN 61010-2-032, pollution
degree 2, 600 V CAT IV, 1000 V CAT III
Table 6
Power & Energy Logger Model PEL 52 - User Manual
300 / 3000 Aac
≤ 2.5 %
latching mechanism
300 / 3000 Aac
≤ 2.5 %