Wi-Fi - AEMC PEL 52 User Manual

Power & energy logger

Hide thumbs Also See for PEL 52:

Table of Contents

3.2.2 Wi-Fi

From the initial screen, press the ▼ button to access the following screen.

NOTE: For the Wi-Fi to operate, the battery must be sufficiently

charged (

Press the

if the battery is too low to enable Wi-Fi.

To establish a Wi-Fi connection

Enable Wi-Fi.

■

Then, this connection will let you connect your instrument to another device, such

as a PC, smartphone, or tablet. The connection procedure is detailed below.

Wi-Fi access point connection procedure

The first connection must be made in Wi-Fi access point mode.

Press the Select

■

ENTER TO START RECORDING.

Press the Select

■

WIFI ST. PUSH ENTER FOR WIFI ST,

WIFI OFF or WIFI AP. PUSH ENTER FOR WIFI AP.

button to activate or deactivate the Wi-Fi. The device will indicate

button first. The device will display START REC. PUSH

button a second time, and the device will display

Figure 10

Power & Energy Logger Model PEL 52 - User Manual

Figure 9

WIFI OFF. PUSH ENTER FOR

Figure 11

Table of Contents