AEMC PEL 52 User Manual page 23

Use the
■
Your device's IP address is 192.168.2.1 3041 UDP and is shown in the
Information menu.
Connect your PC to the device's Wi-Fi. In the Windows status bar, click the
■
connection symbol.
Select your device from the list.
■
Start the PEL Control Panel (see § 5).
■
Go to Instrument, Add an Instrument, PEL 52, to Wifi access point.
■
When you are connected to the PEL Control Panel, you will be able to:
■
Configure the device.
ƒ
Access real-time measurements.
ƒ
Download the recordings.
ƒ
Change the access point SSID name and secure it with a password.
ƒ
Enter the SSID and password for a Wi-Fi network to which the device can
ƒ
connect.
Enter the DataViewSync™ password. This allows the device to access
ƒ
separate private networks.
If the username and password are lost, you can reset them to the factory
configuration (see § 3.2.5).
Wi-Fi connection procedure (continued)
Once your device is connected as a Wi-Fi access point, you can connect it to a
Wi-Fi router. This will allow you to access your device from a smartphone, tablet,
or even from DataViewSync™ through a public or private network.
Power & Energy Logger Model PEL 52 - User Manual
button to select WIFI AP.
Figure 12
23