Supported Electrical Networks - AEMC PEL 52 User Manual

8.4 SUPPORTED ELECTRICAL NETWORKS

The following types of distribution networks are supported:
- Single phase (single phase 2-wire 1 current)
- Single phase (single phase 3-wire 2 currents)
- Two-phase (split-phase single phase 3-wire)
V1, V2 are the phase-neutral voltages of the installation measured.
■
[V1=VL1-N; V2=VL2-N].
The lower case letters v1, v2, v3 denote the sampled values.
■
U12 is the voltage between phases of the installation measured.
■
Lower case letters denote the sampled values [u12 = v1-v2].
■
I1, I2 are the currents flowing in the phase conductors of the installation
■
measured.
The lower case letters i1, i2, i3 denote the sampled values.
■
Abbreviation
1P- 2W1I
Abbreviation
1P- 3W2I
Abbreviation
2P-3W2I
Power & Energy Logger Model PEL 52 - User Manual
Single phase (single phase 2-wire 1 current)
Voltage is measured between L1 and N.
Current is measured on conductor L1.
Single phase (single phase 3-wire 2 currents)
Voltage is measured between L1 and N.
Current is measured on conductors L1 and L2.
Two-phase (split-phase single phase 3-wire)
Voltage is measured between L1, L2, and N.
Current is measured on conductors L1 and L2.
Comments
Comments
Comments
Table 18
Reference
diagram
see § 4.1.1
Reference
diagram
see § 4.1.2
Reference
diagram
see § 4.1.3
67