Table of Contents
Advertisement
Configuration of the Wi-Fi router connection
In the PEL Control Panel, go to the Configuration menu
■
Communication tab, and enter the network name (SSID) and password in
the 'Wifi "Station" mode (STA)' dialog box, port 3041, UDP protocol.
The SSID is the name of your desired network, such as the network of your
smartphone or tablet in access point mode.
Click OK to apply the configuration to the device.
■
Press the Select
■
to
WIFI ST.
Your device will connect to this Wi-Fi network.
ƒ
The Wi-Fi access point connection will be lost.
ƒ
Once the PEL is connected to the network, you can find the PEL's IP
ƒ
address in information mode
24
Figure 13
button twice and the Enter
.
Power & Energy Logger Model PEL 52 - User Manual
,
button twice to switch
Advertisement
Table of Contents
