2.9 MEMORY CARD
The PEL accepts FAT32 formatted SD and SDHC cards with 32 GB or less. The
SD card must be formatted as 32 GB on a PC.
The PEL is delivered with a formatted SD card. If you want to install a new SD
card:
Open the SD card slot protective cover marked
■
■
Press the device's current SD card in until you hear a click. The device will
release the SD card.
Remove the SD card.
■
NOTE: Do not remove SD Card if a recording is in progress.
Check that the new SD card is unlocked.
■
unlocked
Format the SD card. The PEL Control Panel is the best way to format the SD
■
card; otherwise, format it using a PC.
Insert the new SD card. Press it in all the way until you hear a click (see § 2.5).
■
Close the SD card protective cover.
■
Power & Energy Logger Model PEL 52 - User Manual
(see § 2.5).
19