AEMC PEL 52 User Manual page 18

6. Wi-Fi (router connection
ON (steady): Wi-Fi connection is enabled and not transmitting.
Blinking: Wi-Fi is actively transmitting.
OFF: Normal Wi-Fi connection is disabled.
7. Overload
ON: At least one input is out of range and cannot be displayed.
OFF: All inputs are within range.
8. Recording
ON (steady): A recording is in progress.
Blinking: A recording is pending.
Blinking (slowly): A recording is in progress in extended recording mode.
OFF: A recording is neither scheduled nor in progress.
9. Memory
Empty : Instrument memory is empty.
Partially filled
Filled : Instrument memory is full. No recordings can be stored while
the memory is full. To erase all memory use the Format SD Card button in
the PEL Control Panel. The Delete Session Button can be used to erase
selected recordings. For more information reference the Help File.
10. Battery
Empty
Partially filled
Filled : The battery is fully charged.
Blinking: The battery is charging.
18
: Instrument memory is partially full.
: The battery must be charged.
: The battery is partially charged.
Power & Energy Logger Model PEL 52 - User Manual
)