1.4 CHARGING THE BATTERY
Before using the device for the first time, fully charge the battery at a temperature
between (50 to 104) °F (10 to 40) °C.
It takes approximately 5 h to
charge a discharged battery.
Connect the C8 / banana adapter between the V1 and N terminals.
■
Plug the power cord into the adapter and into the wall outlet.
■
The device will turn on.
■
When charging, the
is full and steady, the battery is fully charged.
NOTE: The battery will take approximately 5 h to fully charge.
12
90 ... 690 V
50 ... 60 Hz
Figure 2
symbol will blink and slowly fill up. When the
Power & Energy Logger Model PEL 52 - User Manual
PEL 52
POWER & ENERGY LOGGER
symbol