Table of Contents
Advertisement
7. The InstallShield program installs the selected software. If an earlier version
of the software is already installed on your computer, for each selected
program the InstallShield program will:
(a) Ask you to confirm the installation of the program. Click Next.
(b) Display a status bar indicating the progress of the installation.
(c) Inform you when the program is installed. Click Finish to install the
next selected program.
If the software is not installed (or if the installed software is the same
version as the selected software), the software is installed without
requesting confirmation.
When all programs are installed, a message appears informing you of this.
Click Finish to return to the Setup screen.
8. You can now select additional Setup options to install (see step 3 above).
When finished, click Exit.
9. The DataView
is the PEL Control Panel icon
Panel(s) you have installed.
10. A warning message similar to the one below will appear. Click OK.
There is no USB connection on the PEL 52, therefore ignore this automatic
message that applies to other devices in the PEL range.
A shortcut has been added to your desktop
You can now open PEL Control Panel and connect your PEL to the computer.
44
folder now appears on your computer desktop, within which
®
Power & Energy Logger Model PEL 52 - User Manual
and the icon(s) for any other Control
Figure 29
or Dataview
directory.
®
Advertisement
Table of Contents
