Second Function - Mr (Recall); Clearing The Memory - AEMC 5070 User Manual

1.800.561.8187
This function is automatically activated when a result is saved.
Press the MEM
location. A bargraph is displayed corresponding to the available memory location.
If the entire memory is free, all of the bargraph segments appear.
As soon as the storage is complete, the bargraph disappears.
Each segment of the bargraph equals approximately 50 recordings.
The MR function allows you to recall any of the stored data from memory,
regardless of the position of the rotary selector switch, except OFF or SETUP.
occupied Obj and Test number. In this
case, it is 47 : 99
to select the desired Obj and Test
number.
After selecting the Obj and Test,
item of information relative to this
measurement.
To access more data, press DISPLAY
repeatedly, or press GRAPH if the
mode selected before the start of the
measurement allows.
, press the MR button once again or turn the selector
switch to another position.

3.9 CLEARING THE MEMORY

44
www.
Megohmmeter Model 5070
information@itm.com
.com