Sony MVS-8000SF User Manual page 1188

Icon Title
Change
Password
Create
Key Frame
Deactivate
License
1188
Error Messages
Message
Failed.
The password was not
changed.
[Create Key Frame] cannot be
executed.
FMx is not assigned to a user
region.
[Create Key Frame] cannot be
executed.
Key Frame Register is locked.
(UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is busy.
(UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is being
edited. (UserX)
[Create Key Frame] cannot be
executed.
There is no free Key Frame.
(UserX)
[Create Key Frame] cannot be
executed.
Key Frame Register is not
active. (UserX)
The license will be deactivated
after rebooting your system.
Description
7317.1: Engineering Setup >System
>Maintenance >Setup Operation Lock
In the above menu, the password was not
changed.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame], but it failed
because the frame memory output (FMx) is not
assigned to a user region.
7331.4: Make the assignment in the
Engineering Setup >Switcher >Config >User1-8
Config menu, and try again.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] using a locked
register (UserX region). Unlock the register.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
[Create Key Frame] using a register (UserX
region) into which files are being loaded. Try
again after file loading has finished.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] using a register
(UserX region) with which a keyframe creating
or editing operation is proceeding. Try again
after the keyframe operation has finished.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] for a UserX region
with insufficient usable keyframes.
2515: Frame Memory >Still >Create Key Frame
In the above menu, an attempt was made to
execute [Create Key Frame] using a register for
which the appropriate region selection button in
the numeric keypad control block is not
selected. Try again after you select the region
selection button [UserX] in the numeric keypad
control block.
7316.7: Engineering Setup >System >Install/
Unit Config >License >License Management
In the above menu, the Deactivate License
procedure completed successfully.