Run Mode Setting - Sony DVS-9000 User Manual

Executing an effect automatically
Use the following procedure.
1
2
3
Moving to the first keyframe of the effect
To move to the first keyframe of the effect, press the [REWIND] button.

Run Mode Setting

You can set the run mode in which an effect is executed when you press the
[RUN] button.
Specifying the effect execution direction
To specify the effect execution direction, press the [REV] button, turning it on
(REV) or off (NORM).
To execute the effect so as to alternate NORM and REV, press the [NORM/
REV] button, turning it on.
When the [REV] button is off: The effect is executed in the direction from
When the [REV] button is on: The effect is executed in the direction from the
When the [NORM/REV] button is on: Each time the effect is executed, the
Executing an effect up to the next keyframe
Use the following procedure.
42
Executing Effects
Select the region in which you want to execute the effect, using the region
selection buttons in the numeric keypad control block. (See step 2 (page
22) of "Recalling a register.")
With the numeric keypad, enter the number of the register in which the
effect you want to execute is saved, and press the [ENTER] button to
confirm.
This recalls the effect saved in the register.
In the keyframe control block, press the [RUN] button.
The [RUN] button lights amber and the effect is executed automatically.
the first keyframe to the last keyframe.
last keyframe to the first keyframe.
direction reverses.