Table of Contents
Advertisement
SVS100 Installation, Operation and Maintenance Manual
System Description
3
The keypad and display provide the user interface to the charger. The display constantly updates
the charger and battery status, and allows access to the programming menus through the keypad.
Four status LEDs indicate when a charge is in progress, at 80% complete, fully charged, or in
equalization. A fault/warning LED serves to alert the user to fault conditions.
The GSE SVS-100 works with a small monitoring device mounted on the battery called the
battery monitor/identifier (BMID). As shown in
, when a vehicle equipped with a BMID
Figure 3- 1
connects to the charger, the charger communicates with the BMID to ensure optimal charging.
Figure 3- 1 Components of the Charging System
Typically, the battery dealer or another authorized service technician will install the BMID on the
battery and configure it before delivery to the customer. BMIDs may also be reconfigured on site
through the charger front panel (see the "BMID Programming and Advanced Features Manual").
Many different sizes and types of industrial battery packs may be charged with the GSE SVS-
100. Choose the correct BMID for the nominal voltage of your pack.
23435-W-03-01
Webasto Charging Systems, Inc.
10
Advertisement
Table of Contents
