Table of Contents
Advertisement
3 | Safety
3.4
Safety information for electrical
connection
WARNING
l Each charging station must be protected with its own
line circuit breaker and residual current circuit breaker.
See Requirements installation space.
l Make sure that the electrical connections are de-ener-
gised before connecting the charging station to the
power supply.
l Make sure that the correct supply cable is used for the
power connection.
l Do not leave the charging station unattended with the
cover open.
l Change DIP-switch settings only with the power off.
l Register with the power supply company as required.
3.5
Safety information for initial start-
up
WARNING
l Initial start-up of the charging station must be carried
out only by an electrician.
l Prior to initial start-up, the electrician must check that
the charging station has been connected correctly.
l Do not connect a vehicle during initial start-up of the
charging station.
l Before starting-up the charging station, check the
charging cable, charging coupling and the charging
station for visible damage. The charging station must
not be started up if it is damaged or if the charging
cable/charging coupling is damaged.
3.6
Safety information for cleaning
DANGER
High voltages.
Danger of fatal electric shock. Do not clean the char-
ging station with running water.
Details on maintenance, cleaning and repair can be found in the
manual.
3.7
Safety information for replacing
the charging cable
DANGER
Risk of fatal electric shock.
u
Switch off and secure the power supply to the char-
ging station.
NOTE
Only use genuine Webasto parts.
6 / 37
5111967A OI-II Webasto Unite
Advertisement
Table of Contents
