Figure 92. Add In Card Removal From Bracket; Figure 93. Riser Card Removal From Bracket; Figure 94. Riser Card Installation Onto The Bracket - Intel M50FCP1UR Manual

Intel® Server System M50FCP1UR System Integration and Service Guide
Remove the screw that secures the add-in card to the riser card bracket (see Letter A).
•
• Carefully remove the add-in card to the riser card bracket (see Letter B).
8. Remove the riser card from the Bracket.
Remove the two screws that secure the riser card to the bracket (see Letter A)
•
Carefully Remove the riser card from the bracket (see Letter B)
•
9. Locate and carefully unpack the riser card. Hold the riser card by its edges. To NOT touch the gold
pins of the edge connector.
10. Install the riser card to the riser card bracket
Note: The following installation instructions for riser card to bracket are the same for all included
riser card brackets and supported riser card options.
Align the riser card to the threaded standoffs on the mounting bracket.
•
• Using the supplied screws, secure the riser card to the bracket. Tighten to 5 in-lb.
72

Figure 92. Add in Card Removal from Bracket

Figure 93. Riser Card Removal from Bracket

Figure 94. Riser Card Installation onto the Bracket