Rogue-Ap Scan; Show Rogue-Ap - SMC Networks 2552W-G2 User Manual

6
Command Line Interface

rogue-ap scan

This command starts an immediate scan for access points on the radio interface.
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless)
Command Usage
While the access point scans a channel for rogue APs, wireless clients will not
be able to connect to the access point. Therefore, avoid frequent scanning or
scans of a long duration unless there is a reason to believe that more
intensive scanning is required to find a rogue AP.
Example
Enterprise AP(if-wireless g)#rogue-ap scan
Enterprise AP(if-wireless g)#rogueApDetect Completed (Radio G) : 9 APs
detected
rogueAPDetect (Radio G): refreshing ap database now
Enterprise AP(if-wireless g)#

show rogue-ap

This command displays the current rogue AP database.
Command Mode
Exec
Example
Enterprise AP#show rogue-ap
802.11g Channel : Rogue AP Status
AP Address(BSSID)
======================================================================
00-04-e2-2a-37-23
00-04-e2-2a-37-3d
00-04-e2-2a-37-49
00-90-d1-08-9d-a7
00-30-f1-fb-31-f4
Enterprise AP#
6-112
SSID Channel(MHz) RSSI Type Privacy RSN
WLAN1AP 11(2462 MHz)
ANY 7(2442 MHz)
WLAN1AP 9(2452 MHz)
WLAN1AP 1(2412 MHz)
WLAN 6(2437 MHz)
17 ESS 0
42 ESS 0
42 ESS 0
12 ESS 0
16 ESS 0
0
0
0
0
0