Display And Menus; Display, Buttons, And Leds - Deif SGC 420 User Manual

3. Display and menus

3.1

Display, buttons, and LEDs

No. Name
1 Display
Mains breaker
2
symbol
3 Stop
3 Configure
4 Start
5 Navigation
Genset breaker
6
symbol
Acknowledge
7
alarm
6 Mode selection
User manual 4189341341B EN
Shutdown Alarm
Warning Alarm
Notification
Function
Graphical
Push to open or close the mains breaker.
Stops the genset if manual mode is selected. The controller opens the genset breaker and
the cooling down time starts. If you push the Stop
immediately.
To go to Configuration menu push and hold the Stop
configuration screen. To exit the configuration mode, push and hold the Stop
Push the Start button to select a parameter, and to save the changes you have made.
Starts the genset if manual mode is selected.
Move the selector up and down on the screen.
Push to open or close the genset breaker.
Push to acknowledge active alarms.
Push to change the running mode.
button twice the engine stops
button until you see the
button.
Page 19 of 89