Engine Values On The Display; Engine Communication Settings - Deif SGC 420 User Manual

8.1.4

Engine values on the display

You can configure the SGC controller to show values from the ECU on the display. Go to Engine > Engine Control Unit
(ECU) to configure the values.
Push the down button and hold for 3 seconds to see the ECU display views. To exit the ECU display views, push and
hold the down button for 3 seconds. The ECU view pages are only shown if you have configured the ECU parameters.
Display example
ET1
Engine Temperature 1
T.Coolant
T.Fuel
T.Oil
8.2

Engine communication settings

Use the DEIF smart connect software to configure engine communication for the SGC controller.
Open DEIF smart connect and connect to the SGC controller. Select Start > Engine > Engine Control unit (ECU)
to see the engine communication settings.
User manual 4189341341B EN
NA
NA
NA
Page 79 of 89