Table of Contents
Advertisement
5. Display and menus
5.1
Display, buttons, and LEDs
No.
Name
1
Display
Mains breaker
2
symbol
3
Stop
3
Configure
4
Start
5
Navigation
Genset breaker
6
symbol
Acknowledge
7
alarm
AUTO mode/
8
Mode selection
User manual 4189341360A EN
Shutdown Alarm
Warning Alarm
Notification
STOP
START
AUTO
Function
Graphical
Push to open or close the mains breaker.
Stops the genset if MANUAL mode is selected. The controller opens the genset breaker and
the cooling down time starts. If you push the Stop
immediately.
Push and hold the Stop
and hold the Stop
Push the Start
button to select a parameter, and to save the changes you have made.
Starts the genset if MANUAL mode is selected.
Move the selector up and down on the screen.
Push to open or close the genset breaker.
Push to acknowledge active alarms.
The controller automatically starts and stops (and connects and disconnects) the genset. No
operator actions are needed. The controller also automatically opens and closes the mains
breaker.
Push the stop button to change the mode to MANUAL mode. To change to test mode, push
and hold the AUTO button.
SGC 420
ACK
button to go to the configuration menu. To exit the menu, push
button.
button twice the engine stops
Page 28 of 99
Advertisement
Table of Contents
