Load Histogram; Configuration Menu - Deif SGC 420 User Manual

Examples of display views
3.3.1

Load histogram

The load histogram shows the engine running hours. The running hours are put into load groups. Use the histogram to
monitor how long the genset operates at a specific load percentage.
The load percentage is calculated using these parameters:
• Generator rating
• CT ratio
3.4

Configuration menu

To configure the controller, follow these steps:
1. Push and hold the Stop/Config
2. The display shows this screen:
3. Push the Start button to configure the parameter.
User manual 4189341341B EN
button for a minimum of three seconds.
Page 21 of 89