Add Corporate Branding To The Screen And Touch 10 User Interface - Cisco Webex Room Panorama Administrator's Manual

Cisco Webex Room Panorama and Room 70 Panorama

Introduction

Add corporate branding to the screen and Touch 10 user interface

Sign in to the web interface, navigate to
and open the Branding tab.
From this page you can add your own branding elements
(background brand image, logo, custom message) to the video
conferencing device.
Branding in the awake state
In the awake state you can:
• Add a logo in the bottom right corner (screen and Touch 10)
• Add custom text in the bottom left corner (only on screen, not
on Touch 10)
Custom text
Logo
We recommend:
• A black logo (the device will add a white overlay with 40% opacity so that
the logo and the other user interface elements go well together)
• PNG-format with transparent background
• Minimum 272×272 pixels (it will be scaled automatically)
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration Configuration
Setup > Personalization,
Peripherals Maintenance
40
Administrator Guide
Device settings
(page 1 of 2)
Note: We recommend you NOT to use
the Branding feature if you are using a
multi-screen background image.
About Branding
The Branding feature, as described in
this chapter, allows you to customize
the screen and Touch user interface
appearance without compromising the
overall Cisco user experience.
We recommend that you use this feature
rather than our legacy Custom wallpaper
feature, which prevents the use of
functionality such as One Button to Push.
You cannot use the Branding feature
and a Custom wallpaper at the same
time.
If your device is set up with a Custom
wallpaper, you must click
custom wallpaper before adding branding
elements.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
Appendices
Disable the